The 1 Channel Gateway

Version: 1.3
date: July 11, 2021

(c) Maarten Westenberg (mw12554@hotmail.com)

Introduction

This document describes the process of transforming a sinmple piece of software written for the Raspverry-PI to a full-blown single-channel gateway running on an ESP8266 or ESP32 mcu.

The Hardware Guide consists of the following components:

1. Making an Single Channel Gateway
• Based on ESP8266
• Based on ESP32
2. USB and Cabling attention points
• USB Cable
3. Configuring the development environment for compile, build and up-load.

• For the PlatformIO development environment
• For the Arduino IDE environment

Testing the single channel gateway is described here